跳至主要内容

How to choose the viscosity of HPMC

 How to choose the viscosity of HPMC

 

Hydroxypropyl methylcellulose is used in mortar, putty powder, water-based paint, and tile adhesive. Many manufacturers do not know how to choose the viscosity of hydroxypropyl methylcellulose

 

Putty powder, mortar, water-based paint, tile adhesive

Hydroxypropylmethylcellulose

 

method/step

 

1. Many mortar and putty powder companies use hydroxypropyl methylcellulose as a chemical raw material. Some companies are not very clear about which viscosity hydroxypropyl methylcellulose to choose. Hydroxypropyl methylcellulose on the market Known as 40000-50000 low-viscosity hydroxypropyl methylcellulose, there are also 100000, 150000, 200000 high-viscosity hydroxypropyl methylcellulose. Let's take a look at how various industries should choose hydroxypropyl methylcellulose.

 

2. Cement mortar: Hydroxypropyl methylcellulose with a viscosity of 10W-20W should be selected for cement mortar. Hydroxypropyl methylcellulose with this viscosity can be used as a water-retaining agent and a retarder to make the mortar pumpable and make the mortar pumpable. After the cement mortar is applied, it will not crack due to drying too fast, which increases the strength after hardening.

 

3. Putty powder: The putty powder should choose hydroxypropyl methylcellulose of about 10W, and the water retention is better and the viscosity is lower. The hydroxypropyl methylcellulose of this viscosity mainly plays the role of water retention, bonding and lubrication in the putty, avoiding cracks and dehydration caused by excessive water loss, and at the same time enhancing the adhesion of the putty and reducing the sagging phenomenon during construction , The construction is relatively smooth.

 

4. Tile adhesive: The tile adhesive should use hydroxypropyl methylcellulose with a viscosity of 100000. This viscosity of hydroxypropyl methylcellulose can significantly improve the bonding strength of tile adhesives, increase the water retention and extend the construction period, fine and uniform, easy to construct, and has good anti-moisture property.

 

5. Glue: 107 glue and 108 glue should use 100000 viscosity instant hydroxypropyl methylcellulose. Hydroxypropyl methylcellulose can make the glue thicken and water-retaining, and enhance the workability.

标签：

评论

发表评论

此博客中的热门博文

Hydroxypropyl Methyl Cellulose HPMC in Building Materials

Hydroxypropyl Methyl Cellulose HPMC in Building Materials : Hydroxypropyl methylcellulose(HPMC)  is a nonionic cellulose ether prepared by a series of chemical processing using natural polymer material cellulose as a raw material. They are an odorless, odorless, non-toxic white powder that swells in cold water into a clear or slightly turbid colloidal sol...
发表评论
阅读全文

Current situation and development trend of cellulose ether market

  Abstract: The production and consumption of hydroxymethyl cellulose and methyl cellulose and their derivatives were introduced, and the future market demand was predicted. The competition factors and problems in the cellulose ether industry were analyzed. Some suggestions on the development of cellulose ether industry in our country were given. Key words: cellulose ether; Market demand analysis; Market research   1. Classification and use of cellulose ether 1.1 Classification Cellulose ether is a polymer compound in which the hydrogen atoms on the anhydrous glucose unit of cellulose are replaced by alkyl or substituted alkyl groups. On the chain of cellulose polymerization. Each anhydrous glucose unit has three hydroxyl groups that can participate in the reaction if completely replaced. The value of DS is 3, and the degree of substitution of commercially available products ranges from 0.4 to 2.8. And when it's replaced by an alkenyl oxide, it can form a new hydroxyl group th...
发表评论
阅读全文

Two gypsum plaster formulation are recommended below:

  Two gypsum plaster   formulation are recommended below : 1 .   heavy gypsum plaster mortar   formula Gypsum powder (initial setting time 5-6 minutes) - 300 kg Washed sand - 650 kg Talc powder - 50 kg Gypsum retarder - 0.8 kg Cellulose ether HPMC   (80,000-100,000 cps ) — 1.5kg Thixotropic lubricant - 0.5 kg The operating time is 60-70 minutes, the water retention rate is 96%, and the national standard water retention rate is 75%   2 . lightweight gypsum plaster mortar   formula Gypsum powder (initial setting time 5-6 minutes) — 850 kg Washed sand - 100 kg Talc powder - 50 kg Gypsum retarder - 1.5 kg Cellulose ether HPMC (40,000-60,000) — 2.5 kg Thixotropic lubricant - 1 kg Vitrified beads - 1 cubic
发表评论
阅读全文